Customized 40G QSFP+ to 8 LC Connetor Breakout AOC

QSFP+ to 8 LC Connetor Breakout AOC are a high performance, long reach interconnect solution supporting 40G Ethernet, low power consumption, fiber channel and PCIe. It is compliant with the IEEE P802.3ba 40GBASE-SR4 and QSFP MSA.

40G QSFP+ to 8 LC Connetor Breakout Active Optical Cable offers IT professionals a cost-effective interconnect solution for merging 40G QSFP and 10G SFP+ enabled host adapters, switches and servers.It is a high data rate parallel active optical cable (AOC), to overcome the bandwidth limitation of traditional copper cable. The AOC offers 4 independent data transmission channels and 4 data receiving channels via the multimode ribbon fibers, each capable  is capable of transmitting data at rates up to 10Gb/s, providing an aggregated rate of 40Gb/s.  QSFP+ Breakout Cable are suitable for short distances and offer a highly cost-effective way to connect within racks and across adjacent racks. These breakout cables connect to a 40G QSFP+ port of a switch on one end and to four 10GSFP+ Transceivers of a switch on the other end.Consequently, an aggregate data rate of 40Gbps over 100 meters transmission can be achieved by this product, to support the ultra-fast computing data exchange.

All of Fiberstore 40GBASE QSFP to 4x SFP+ Breakout AOC are 100% compatible with major brands like Cisco, HP, Juniper, Enterasys, Extreme, H3C and so on. If you would like to order high quality compatible 40GBASE QSFP to 4x SFP+ Breakout AOC and get worldwide delivery.This new version 40GBASE QSFP+ to 4SFP+ Breakout Active Optical Cable opens EEPROM for customer re-coding for different applications.Fiberstore provide customized length within 100m of choice(40G QSFP + ports consumes less than 1.5W).

QSFP-8LC-AOC-1-xx Specifications

• Length: 1 Meter
• Connector 1: QSFP+
• Connector 2: 8x LC Connector
• Cable Type: AOC Cable
• Full duplex 4 channel 850nm parallel active optical cable
• Transmission data rate up to 10.3Gbit/s per channel
• SFF-8436 QSFP+ compliant housing and hot pluggable electrical interface.
• Management Interface and digital diagnostic monitoring(DDM) through I2C
• Support Rx output pre-emphasis
• 4ch 850nm VCSEL array
• 4ch PIN photo detector array
• Helix type multi-mode optical fibre cable of up to 100m
• OFNP (Optical Fibre Non-Conductive Plenum) rated cable
• Differential AC-coupled high speed data interface
• Housing isolated from connector ground
• Operating Temperature: 0 to 70℃
• RoHS 6 compliant
• 3.3V power supply voltage

QSFP-8LC-AOC-1-xx Applications

• Infiniband transmission at 4ch SDR(2.5Gbit/s), DDR(5Gbit/s) and QDR(10Gbit/s)
• Multi-channel 10Gb Ethernet transmission up to 4 channels
• Fiber Channel transmission at 8.5Gbit/s per channel, up to 4 channels
• QSFP+ to LC cables with MT connectors for plugging into existing cable runs or patch panels
• Creating a breakout cable with four Duplex LC connectors for port expander applications
• SDR / DDR / QDR
• Data Centers

Notes
This version 1M(3.3ft) 40GBASE QSFP+ to LC Connetor(8) Breakout Active Optical Cable opens EEPROM for customer re-coding for different applications.
Customized 40G QSFP+ to 8 LC Connetor Breakout AOC are available in various lengths and other options.