Save Big on HP compatible SFP transceivers
HP SFP transceivers offered by Fiberstore are third-party optical modules certified fully compatible with HP Switches & Routers. The HP SFP modules can be mixed and deployed with HP OEM SFP transceivers for seamless network performance and interoperability. Fiberstore provides HP compatible SFP transceivers which can be equivalent to HP 455883 B21, HP J4858C, HP J4859A, HP J4858B, HP JD089B, HP J9143B, HP J4858A, etc.
HP J4859A compatible 1000BASE-LX SFP transceivers are high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 10km transmission distance with SMF. The transceiver is composed of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA. This 1000BASE-LX/LH SFP offers the same function with HP J4859A and it is fully compatible with Hewlett-Packard devices:
Key Features:
- Data-rate of 1.25Gbps/1.063Gbps operation
- 10km with 9/125 µm SMF
- 1310nm FP laser and PIN photodetector for 10km transmission
- Hot-pluggable SFP footprint duplex LC connector Interface
- Class 1 FDA and IEC60825-1 Laser Safety Compliant
- Compatible with SFP MSA
- Compatible with SFF-8472
- +3.3V single power supply and TTL Logic Interface
- Average Output Power:-9~ -3dBm
- Receiver Sensitivity:-21dBm
HP J9143B compatible 1000BASE 1310nmTX/1490nmRX BIDI SFP transceiver are bi-directional upstream SFP module Gigabit Ethernet 1000BASE-BX and Fiber Channel single fiber applications by using 1310nm/1490nm transmitter and 1490nm/1310nm receiver. It is with the SFP 20-pin connector to enable hot plug capability. The transmitter section uses a class 1 laser compliant depending on International Safety Standard IEC 60825. The receiver section uses an integrated B type/ A type detector preamplifier (IDP) installed in an optical header and a limiting post-amplifier IC. The SFP BIDI transceivers are designed to be compliant with SFF-8472 Multi-source Agreement (MSA). This 1000Base-BX10 SMF SFP offers the same function with HP J9143B and it is fully consistent with HP devices.
Key Features:
- Support 1.25Gbps Data Links
- 1310nm FP TX/1490nm RX
- Up to 10km with 9/125 µm SMF
- Single 3.3V Power Supply and TTL Logic Interface
- Hot-Pluggable SFP Footprint Simplex LC Connector Interface
- Class 1 FDA and IEC60825-1 Laser Safety Compliant
- Compliant with SFP MSA Specification
- Average Output Power: -9.5~-3dBm
- Receiver Sensitivity: -22dBm
HP JD089B Compatible 1000BASE-T Copper SFP modules are based on the SFP Multi Source Agreement (MSA). It is compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE STD 802.3 and 802.3ab.
Key Features:
- Support 1000BASE-T Operation in Host Systems
- For 100m reach over Cat 5 UTP Cable
- Hot-Pluggable SFP Footprint
- Support RX_LOS as Link indication function
- Fully metallic enclosure for low EMI
- Low power dissipation (1.05 W typical)
- Compact RJ-45 connector assembly
- Compliant with SFP MSA and IEEE Std 802.3-2002
- Detailed product information in EEPROM
Fiberstore provides various types of SFP fiber transceivers including 100M & 1G SFP, SONET/SDH SFP, 4G SFP, CWDM & DWDM SFP, BIDI SFP and Copper & SGMII SFP. SFP with special parameters can be also customized up to customers' requirements. In addition, Fiberstore offers cost-effective SFP compatible with equipment such as Cisco, HP, Juniper, NETGEAR, Finisar, Dell, etc. All the SFP transceiver modules are 100% tested before shipping and have a lifetime warranty.
More Related Article:
Netgear Agm731f Compatible SFP