HP 10G SFP Transceiver Module From Fiberstore
HP SFP+ transceivers offered by Fiberstore are third-party optical modules certified fully compatible with HP Switch/Router product line. These optical transceivers can be mixed and deployed with HP OEM SFP+ for seamless network performance and interoperability. The cost-effective HP SFP+ modules are 100% tested before delivered worldwide. Fiberstore provides HP Compatible SFP+ Transceivers which can be equivalent to HP J9150A, HP J9151A, HP J9152A, HP JD092B, HP 455886-B21 and so on.
HP 455886-B21, which is a BladeSystem 10Gb LR SFP+ for the virtual connect Flex-10 Ethernet module.And now let me introduce hp 455886-B21 in detail.
HP 455886-B21 Features
- Hot Pluggable
- Distance up to 10km
- Fully compatible with HP
- 1310nm DFB-LD Transmitter
- Operating data rate up to 10.3Gbps
- High Quality with ISO9001, TUV, CE, FCC, UL and RoHS certificates
- Single 3. 3V Power supply and TTL Logic Interface
- Duplex LC Connector Interface
- 10GBASE-LR SFP+ 1310nm 10km optical transceiver
- Compliant with MSA SFP+ Specification SFF-8431
- Compliant with 4.25G FC-PI-4 400-SM-LC-L FC standard
- Compliant with 8.5G FC-PI-4 800-SM-LC-L FC standard
- Compliant with IEEE 802.3ae 10GBASE-LR/LW
- Compliant with 1.0625G FC-PI-4 100-SM-LC-L FC standard
- Compliant with 2.125G FC-PI-4 200-SM-LC-L FC standard
- Compliant with 10GFC 1200-SM-LL-L FC standard
HP 455886-B21 Applications
- 1000 Base-LX Ethernet
- 10GBASE-LW at 9.95Gbps
- 10GBASE-LR at 10.31Gbps
This 1310 nm DFB 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 10km.
The 455886-B21 module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200mm of improved FR4 material or up to about
150mm of standard FR4 with connector.
The transmitter converts 10Gbit/s serial PECL or CML electrical data into serial optical data compliant with the 10GBASE-LR standard. An open collector compatible Transmit Disable is provided. The transmitter has a internal automatic power control loop (APC) to ensure constant optical power output across supply voltage and temperature variations. An open collector compatible Transmit Fault is provided. Transmit Fault is a module output contact that when high, indicates that the module transmitter has detected a fault condition related to laser operation or safety. The Transmit Fault output contact is an open drain.collector and shall be pulled up to Vcc-Host in the host with a resistor in the range 4 7-10kΩ.
Fiberstore designs, develops, manufactures and markets a diverse portfolio of high-performance, cost- competitive fiber optic communication products for all applications. It also mainly involved in providing complete teams of optoelectronic device solutions to gain more brand extensions and influence for Fiberstore in the world.OEM/ODM order is available They can supply SFP module according to your requirements, and design SFP module label and packaging for your company. Except HP SFP Module,such as the Finisar, Juniper and Cisco SFP+ module is also provided.(Finisar FTLX8571D3BCL)